Description

O Oleofugante It is a waterproofing agent indicated for protection against oil stains, grease and excessive humidity, preventing loss of material resistance.

Ready-to-use product, does not alter the characteristics of the applied substrate. It can be applied to internal and external areas, floors, facades and roofs. Suitable for marble, granite, slate, mining stone, cement, iron stone, rustic ceramics, structural ceramics, among others.

Instructions for use

The product must be applied pure, with the help of a brush, roller, brush or spray nozzle. The surface to be applied must be completely clean and dry, if cleaning is necessary, leave it to dry for 2 or 3 days before applying the product. The product seals the surface pores, so it is very important that the area to be applied is very clean, to prevent dirt from becoming embedded after applying the product.

Application must be done evenly to avoid stains. After application, it must be done evenly to avoid stains. After applying the 1st coat, you must wait 2 hours before proceeding with the next coat, and so on. If there is any excess product, remove it with a clean, dry cloth, using light-colored cloths.

For highly absorbent surfaces it is recommended to apply 2 to 3 coats, medium to low surface application 2 coats.

Wait at least 24 hours after application to use the applied area.

Performance

The yield varies depending on the absorption of the surface, an example of high absorption: sandstone, São Tomé stone, among others, yield of 4 m²/liter. Medium absorption products: cement flooring, exposed bricks, iron stone, yield around 7 m²/liter. Low absorption: granite and rustic ceramics, yield above 30m²/liter.

Maintenance

If applied as indicated, its durability varies between 1 and a half to 3 years.

Ingredients

Silane, siloxane and petroleum derivatives.