Description

SelaStone Water repellent is a waterproofer indicated to protect against stains caused by excessive humidity, preventing loss of material strength.

Ready-to-use product, does not change the characteristic of the applied substrate. Can be applied indoors and outdoors, floors, facades and roofs. Suitable for marble, granite, slate, Saint Thomas stone, cement, stone iron, rustic pottery, structural ceramics among others.

Instructions for use

The product must be applied neat, with the aid of a brush, roll, brush or spray nozzle. The surface to be applied must be completely clean and dry, if you need to clean, let it dry for 2 Where 3 days before product application. The product seals the surface pores, so it is very important that the place to be applied is well clean, to prevent dirt from becoming impregnated after application of the product.

Application must be done evenly to avoid stains. After application, it must be done evenly to avoid stains. After applying the 1st coat, wait 2 hours to proceed with the next coat, and so on. If any excess product occurs, remove it with a clean, dry cloth, wear light-colored cloths.

For high absorption surfaces it is recommended to apply 2 a 3 coats, medium to low application surface 2 coats.

Wait no minimum 24 hours after application to use the applied area.

Performance

Yield varies with surface absorption, high absorption example: sandstone, stone são tomé among others, income from 4 m² / liter. Medium absorption products: cement floor, exposed bricks, stone iron, yield around 7 m² / liter. low absorption: granite and rustic ceramics, yield above 30m²/liter.

Maintenance

If applied as indicated, its durability varies between 1 year and a half to 3 years old.

Ingredients

Silano, siloxane and petroleum derivatives.